Yo! This project is still a Work In Progress. Instructions, board layouts and BOM might change!
TI CC2640 BLE Plug-in module for MSP430 LaunchPad
License:
Attribution-ShareAlike (CC-BY-SA)
Created:
7 years ago
Updated:
7 years ago
Views:
4503
0 Collect
0 Comments
Share
23 Download (5.89 MB)
Make a donation to Triton Zhang

The Panda serial plug-in module(Open for download)is an easy-to-use plug-in module for adding T2640A or T1310A RF module with digital sensor to LaunchPad development kit design. TI MSP430G2 mother board development kit developers can use this plug-in module to start developing CC2640/CC1310 with sensor applications using the onboard humidity sensors. enter image description here

1. Key Features

 Support T2640A or T1310A RF Module

 Humidity Sensor

 Works with TI MSP430G2 Mother Board development kits

 USB 5.0V Power supply

2. Pinout

The following figure shows the pinout of the Panda-2215 plug-in module.

![enter image description here](https://www.openhardware.io//uploads/5a0a1fd8073855d95a0e0149/image/Pins Defination.png "enter image title here")

The ND-Panda plug-in module adheres to the 20-pin LaunchPad development kit and ND-Panda plug-on module pinout sthandard. The ND-Panda plug-in module has female headers to support stacking on top. You must take careful consideration when stacking to the launchPad.

3. Mother Board(Open for download)

The MSPG2-Mother Development Kit is an easy-to-use microcontroller development board for the low-power and low-cost MSP430G2x MCUs. It has on-board emulation for programming and debugging and features a 14/20-pin DIP socket, on-board buttons and LEDs & Plug-in module pinouts that support a wide range of modules for added functionality such as wireless, displays & more.

enter image description here

4. Sub-Board

NDB-T2640A1 module is designed based on CC2640F128F128 Bluetooth Smart BLE4.1 or BT 5.0 System-on-Chip, fully supports the single mode Bluetooth Low Energy operation. The module contains a 32-bit ARM CortexTM-M3 processor, with the working frequency at 48.0 MHz which is the same as the main processor. The module has rich peripherals function libraries, and a unique ultra-low power sensor controller, which is fit for connecting the external sensors in the sleep mode and/or acquiring analog and digital data independently.

![enter image description here](https://www.openhardware.io//uploads/5a0a1fd8073855d95a0e0149/image/[20171019] NDB-T2640A1_Feature.png "enter image title here")

More Board information please contact me: Email: smartztn@necdaz.com

Thank you.